Insert ignition key into ignition key cylinder and turn on ignition switch.Īfter performing this operation. Operate according to following procedure:ġ. This is an old model, so here we enter old password The system starts communication with the vehicle.
Input PIN for initialization into the following input columnģ. Get Immobilizer code (PIN) for initialization from the followingĢ. Therefore, all of the customer’s keys should be obtained before starting this procedure.ġ. This procedure erase all registered keys. This vehicle has a 16-PIN standard connectorĬhoose Maintenance function->NATS (Nissan Anti-theft system)-> Manual selection test->After replacing or installing operation->Replace ECM (Used Part) (Note: pocket juice is a portable charger.) As titled, possible to program a used Nissan ECM by using Launch X431 Diagun IV OBD2 diagnostic scanner?Ĭonnection Diagun IV with vehicle via DBscar Bluetooth connector
